Streamer Pro 1.x - Phone compatibility

Test result

Status [Passed/Failed]:
TTP database: Nebula
TTP #:
Tested by:
Date:
Used test time [hours]:

Equipment

Equipment: Serial no.: Hw rev.: Fw rev.: Settings: Comments:
Left HI


FNCP Image
System Test Settings 		Alta Pro RITE 312
Right HI


FNCP Image
System Test Settings 		Alta Pro RITE 312
Streamer Pro 1.2




LPA ver. 2




TV-box ver. 2




E-mic




A2DP dongle



BTD800
Reference phone



Mobile phone
Test phone



Mobile phone to be tested for compatibility.
Land Line Phone




Jack Cable




Tags: Outsourceable

Revision History

Version
 Initials
 Date
 Reasons for change
1.0
 NMP
 26-06-2012
 Revision history created.
1.1
 NMP
 30-07-2012
 Link to phone software upgrade guide inserted.
1.2 NMP 30-07-2012 Changed according to review by CBR; All connection steps that include the test phone are moved up so that they are prior to the connection steps that include the reference phone. This is done in order to avoid that the reference phone takes up the media audio connection to Streamer.
1.3 NMP 02-10-2012 Updated according to v 1.0 of "Orbis eSW Requirements Specification". Furthermore, Orbis Fitting Settings is replaced with NebulaDeveloper.
1.4 Tomas 17-10-2012 Added reference phone in first paragraph.
1.5 AND 20-12-2012 Adapted test to new A2DP concept.
1.6 AND 21-12-2012 Added check of AV toggle can start phone media player.
1.7 NMP 20-03-2013 Added jack streaming scenario (4.3)
1.8 NMP 21-10-2013 Manually 'converted' to HTML document. Divided into four sections, which should be reviewed by BOFR.
1.9 NMP 19-12-2013 Corrected step 10 in part 2: BT should be turned off on reference phone and not test phone.

Review History

Version
 Initials
 Date
 Comments
1.0
 CBR
 28-07-2012
 Test phone should be connected to Streamer before reference phone is connected.
1.3
 Thomas
 17-10-2012
 Test failed with HTC sensation. A2DP issues.
1.4 Thomas 02-01-2012 Test passed with HTC Desire S on Streamer FW: 0.9.9.

About

Objective: The scope is to test if chosen mobile phones are compatible with Streamer Pro 1.x. The compatibility of a mobile phone (test phone) is first tested when Streamer is paired to the test phone and a reference mobile phone (reference phone) and then when Streamer is paired to the test phone and a LPA.
Requirements:
REQ-ORB-0126, reviewed 060312
Link to automated script: link Perforce/P4
Changelist number: 		Changelist# of auto-test in P4
Remarks: Important: Make sure the test phone has the newest SW update installed.
See the TC Wiki page: "Upgrading cell phones for compatibility test".
Important: Mobile must not be on silent during the test, as it is necessary to ensure in-band ringing does not provoke errors. In-band ringing: Ringtone from mobile is heard in HI. Out-of-band ringing: HIs own ringtone.
Sound quality should be OK in all steps. Be aware of noise or disturbances.
Estimated test time [hours]: 2

Precondition

TestCenterDefaultSettings have been written to the Streamer.

All pairings are cleared on the Streamer. All pairings are cleared on both the test phone and the reference phone.

Streamer, A2DP dongle, E-mic, TV-box ver. 2 and LPA ver. 2 are OFF. Jack cable is not connected to Streamer.

Test Steps

Part 1: Test phone and LPA

Step: Specification: Expected (pass/fail criteria): Req Step: Observed: Result:
1
 Turn the Streamer ON.
 The Streamer enters idle mode.


2
 Pair the Streamer and the E-mic.
 Audio from the E-mic is automatically streamed to HIs.


3
 Stop E-mic streaming and turn the E-mic OFF.
 E-mic streaming ends and Streamer enters idle mode.
The E-mic is turned OFF.


4
 Pair the Streamer and the TV-box.
 Audio from the TV-box is automatically streamed to HIs.


5
 Stop TV-box streaming and disconnect the TV-box from the power supply.
 TV-box streaming ends and Streamer enters idle mode.
The TV-box is OFF.


6
 Pair the Streamer and the test phone.
 The Streamer and the test phone are paired and connected.


7
 Turn Bluetooth OFF on the test phone. The Streamer and the test phone are disconnected.


8
 Pair the Streamer and the LPA. The Streamer and the LPA are paired and connected.


9
 Disconnect the LPA from the power source. The Streamer and the LPA are disconnected.


10
 Turn the E-mic ON. E-mic streaming starts automatically and is streamed to HIs. Connection.

11
 Stop E-mic streaming from the E-mic. E-mic streaming ends and Streamer enters idle mode.


12
 Connect the TV-box to the power supply and start TV-box streaming from the Streamer. TV-box streaming starts and is streamed to HIs.


13
 Stop TV-box streaming on the Streamer. TV-box streaming ends and Streamer enters idle mode.


14
 Turn Bluetooth ON on the test phone. The Streamer and the test phone reconnect.


15
 Connect the LPA to the power supply. The Streamer and the LPA reconnect.
LPA: Power LED is green and when the LPA reconnects to the Streamer the power LED turns blue.


16
 Start A2DP streaming from the test phone (start media player). A2DP streaming starts automatically and is streamed to HIs.
Note:Test phone does not A2DP streaming
17
 Stop A2DP streaming on Streamer. A2DP streaming ends and Streamer enters idle mode.
Note:Test phone does not A2DP streaming
18
 Turn the Streamer OFF. The Streamer turns OFF. Reconnection.

19
 Turn the Streamer ON. The Streamer turns ON and enters idle mode.


20
 Start E-mic streaming from the E-mic. E-mic streaming starts and is streamed to HIs.


21
 Stop E-mic streaming on Streamer. E-mic streaming ends and Streamer enters idle mode.


22
 Start TV-box streaming on Streamer. TV-box streaming starts and is streamed to HIs.


23
 Stop TV-box streaming on Streamer. TV-box streaming ends and Streamer enters idle mode.


24
 Ensure that the test phone has reconnected to the Streamer. Streamer and test phone are paired and connected.


25
 Ensure that the LPA has reconnected to the Streamer. Streamer and LPA are paired and connected: LPA power LED is blue.


26
 Start A2DP streaming from the test phone (start media player). A2DP streaming starts automatically and is streamed to HIs.
Note:Test phone does not A2DP streaming
27
 Stop A2DP streaming on Streamer. A2DP streaming ends and Streamer enters idle mode.
Note:Test phone does not A2DP streaming
28
 Turn Bluetooth OFF on test phone and disconnect LPA from the power supply.
Turn Bluetooth ON on test phone.

Wait at least 2 min.		 The connection between the Streamer and the test phone is stable with the LPA turned OFF.


29
 Reconnect the LPA to the power supply. The Streamer and LPA reconnect: LPA power LED turns blue (after being green when turned on).


30
 Start A2DP streaming from the test phone (start media player). A2DP streaming starts automatically and is streamed to HIs. Call handling: A2DP streaming from phone. Note:Test phone does not A2DP streaming
31
 Call the test phone. Ringtone is heard in the HIs and A2DP streaming is ended.


32
 Reject the call on the Streamer. Call is rejected and A2DP streaming is resumed.


33
 Make an outgoing call from the test phone. Ring back tone is heard in the HIs and streaming ends.


34
 Accept the call on the remote phone. Call is streamed to HIs and is heard in remote phone.


35
 End the call on Streamer. Call is ended and A2DP streaming is resumed.


36
 Call the test phone. Ringtone is heard in the HIs and A2DP streaming is ended.


37
 Accept the call on the Streamer. Call is streamed to HIs and is heard in remote phone.


38
 End call on remote phone. Call is ended and A2DP streaming is resumed.


39
 Stop A2DP streaming on Streamer. A2DP streaming ends and Streamer enters idle mode.
Note:Test phone does not A2DP streaming
40
 Start A2DP streaming on Streamer. A2DP streaming starts and is streamed to HIs.
Note:Test phone does not A2DP streaming
41
 Stop A2DP streaming in Streamer. A2DP streaming ends and Streamer enters idle mode.
Note:Test phone does not A2DP streaming
42
 Start TV-box streaming on Streamer. TV-box streaming starts and is streamed to HIs. Call handling: TV-box streaming.

43
 Call the test phone. Ringtone is heard in HIs and
if out-of-band ringing: TV-box streaming is attenuated.
if in-band ringing: TV-box streaming ends.


44
 Reject the call on Streamer. Call is rejected and TV-box streaming is resumed.


45
 Make an outgoing call from the test phone. Ring back tone is heard in the HIs and streaming ends.


46
 Accept the call on the remote phone. Call is streamed to HIs and is heard in remote phone.


47
 End the call on Streamer. Call is ended and TV-box streaming is resumed.


48
 Call the test phone. Ringtone is heard in the HIs and
if out-of-band ringing: TV-box streaming is attenuated.
if in-band ringing: TV-box streaming ends.


49
 Accept the call on Streamer. Call is streamed to HIs and is heard in remote phone.


50
 End the call on the remote phone. Call is ended and TV-box streaming is resumed.


51
 Stop TV-box streaming on Streamer. TV-box streaming ends and Streamer enters idle mode.


52
 Start E-mic streaming on Streamer. E-mic streaming starts and is streamed to HIs. Call handling: E-mic streaming.

53
 Call the test phone. Ringtone is heard in the HIs and
if out-of-band ringing: E-mic streaming is attenuated.
if in-band ringing: E-mic streaming ends.


54
 Reject the call on Streamer. Call is rejected and E-mic streaming is resumed.


55
 Make an outgoing call from the test phone. Ring back tone is heard in the HIs and streaming ends.


56
 Accept the call on the remote phone. Call is streamed to HIs and is heard in remote phone.


57
 End the call on Streamer. Call is ended and E-mic streaming is resumed.


58
 Call the test phone. Ringtone is heard in the HIs and
if out-of-band ringing: E-mic streaming is attenuated.
if in-band ringing: E-mic streaming ends.


59
 Accept the call on Streamer. Call is streamed to HIs and is heard in remote phone.


60
 End the call on the remote phone. Call is ended and E-mic streaming is resumed.


61
 Stop E-mic streaming on Streamer. E-mic streaming ends and Streamer enters idle mode.


62
 Insert jack cable in Streamer and start jack streaming on Streamer. Jack streaming starts and is streamed to HIs. Call handling: Jack streaming.

63
 Call the test phone. Ringtone is heard in the HIs and
if out-of-band ringing: Jack streaming is attenuated.
if in-band ringing: Jack streaming ends.


64
 Reject the call on Streamer. Call is rejected and jack streaming is resumed.


65
 Make an outgoing call from the test phone. Ring back tone is heard in the HIs and streaming ends.


66
 Accept the call on the remote phone. Call is streamed to HIs and is heard in remote phone.


67
 End the call on Streamer. Call is ended and jack streaming is resumed.


68
 Call the test phone. Ringtone is heard in the HIs and
if out-of-band ringing: Jack streaming is attenuated.
if in-band ringing: Jack streaming ends.


69
 Accept the call on Streamer. Call is streamed to HIs and is heard in remote phone.


70
 End the call on the remote phone. Call is ended and jack streaming is resumed.


71
 Stop jack streaming and unplug jack cable from the Streamer. Jack streaming ends and Streamer enters idle mode.


72
 Call landline phone. Ringtone is heard in HIs. Call handling: Simultaneous calls.

73
 Accept the call on Streamer. Call is streamed to HIs and heard in remote phone.


74
 Call the test phone. The ongoing call on the landline/Streamer is undisturbed.


75
 Accept the call on the test phone. The ongoing call on the landline/Streamer is still undisturbed, and the call is streamed to the test phone.


76
 End the call on the test phone. The ongoing call on the landline/Streamer is still undisturbed, and the call on the test phone is ended.


77
 End the landline call on the Streamer. Call is ended and Streamer enters idle mode.


78
 Call the test phone. Ringtone is heard in HIs. Call handling: Transfer call.

79
 Accept the call on Streamer. Call is streamed to HIs and heard in the remote phone.


80
 Use the Streamer to transfer the call to the test phone. The call is now heard in the phone and is no longer streamed to HIs.


81
 Use the Streamer to transfer the call back to the Streamer. The call is now streamed to the HIs.


82
 End the call on Streamer. Call is ended and Streamer enters idle mode.


83
 Make an outgoing call from the test phone. Ring back tone is heard in the HIs.


84
 Accept the call on the remote phone. Call is streamed to HIs and heard in remote phone.


85
 End the call on Streamer. Call is ended and Streamer enters idle mode.


86
 Make an outgoing call from the test phone to a BUSY remote phone. Two acceptable outcomes, depending on the test phone:
  1. Busy tone is heard in HIs (and call is ended automatically or from Streamer).
  2. Call is ended automatically (no busy tone).
 Call handling: Remote phone busy.

87
 If the call was not automatically ended, end the call on Streamer. Streamer enters idle mode (if not already in idle mode.)


Part 2: Test phone and reference phone

...
Step: Specification: Expected (pass/fail criteria): Req Step: Observed: Result:
88
 Repeat the preconditions. Pairings are cleared, Streamer and all other devices are OFF.


89
 Turn the Streamer ON.
 The Streamer enters idle mode.


90
 Pair the Streamer and the E-mic.
 Audio from the E-mic is automatically streamed to HIs.


91
 Stop E-mic streaming and turn the E-mic OFF.
 E-mic streaming ends and Streamer enters idle mode.
The E-mic is turned OFF.


92
 Pair the Streamer and the TV-box.
 Audio from the TV-box is automatically streamed to HIs.


93
 Stop TV-box streaming and disconnect the TV-box from the power supply.
 TV-box streaming ends and Streamer enters idle mode.
The TV-box is OFF.


94
 Pair the Streamer and the test phone.
 The Streamer and the test phone are paired and connected.


95
 Turn Bluetooth OFF on the test phone. The Streamer and the test phone are disconnected.


96
 Pair the Streamer and the reference phone. The Streamer and the reference phone are paired and connected.


97
 Turn Bluetooth OFF on the reference phone. The Streamer and the reference phone are disconnected.


98
 Turn the E-mic ON.
 E-mic streaming starts automatically and is streamed to HIs.
 Connection.

99
 Stop E-mic streaming from the E-mic.
 E-mic streaming ends and Streamer enters idle mode.


100
 Connect the TV-box to the power supply and start TV-box streaming from the Streamer.
 TV-box streaming starts and is streamed to HIs.


101
 Stop TV-box streaming on the Streamer.
 TV-box streaming ends and Streamer enters idle mode.


102
 Turn Bluetooth ON on the test phone.
 The Streamer and the test phone reconnect.


103
 Turn Bluetooth ON on the reference phone.
 The Streamer and the reference phone reconnect.


104
 Start A2DP streaming from the test phone (start media player).
 A2DP streaming starts automatically and is streamed to HIs.
Note:Test phone does not A2DP streaming
105
 Stop A2DP streaming on Streamer.
 A2DP streaming ends and Streamer enters idle mode.
Note:Test phone does not A2DP streaming
106
 Turn the Streamer OFF.
 The Streamer turns OFF.
 Reconnection.

107
 Turn the Streamer ON.
 The Streamer turns ON and enters idle mode.


108
 Start E-mic streaming from the E-mic.
 E-mic streaming starts and is streamed to HIs.


109
 Stop E-mic streaming on Streamer.
 E-mic streaming ends and Streamer enters idle mode.


110
 Start TV-box streaming on Streamer.
 TV-box streaming starts and is streamed to HIs.


111
 Stop TV-box streaming on Streamer.
 TV-box streaming ends and Streamer enters idle mode.


112
 Ensure that the test phone has reconnected to the Streamer.
 Streamer and test phone are paired and connected.


113
 Ensure that the reference phone has reconnected to the Streamer.
 Streamer and reference phone are paired and connected.


114
 Start A2DP streaming from the test phone (start media player). A2DP streaming starts automatically and is streamed to HIs.
Note:Test phone does not A2DP streaming
115
 Stop A2DP streaming on Streamer.
 A2DP streaming ends and Streamer enters idle mode.
Note:Test phone does not A2DP streaming
116
 Turn Bluetooth OFF on test phone and then turn Bluetooth OFF on reference phone.
Turn Bluetooth ON on test phone.

Wait at least 2 min.
 The connection between the Streamer and the test phone is stable when Streamer and reference phone are disconnected.


117
 Turn Bluetooth ON on the reference phone.
 The Streamer and the reference phone reconnect.


118
 Start A2DP streaming from the test phone (start media player).
 A2DP streaming starts automatically and is streamed to HIs. Call handling: A2DP streaming from phone.
 Note:Test phone does not A2DP streaming
119
 Call the test phone.
 Ringtone is heard in the HIs and A2DP streaming is ended.


120
 Reject the call on the Streamer.
 Call is rejected and A2DP streaming is resumed.


121
 Make an outgoing call from the test phone.
 Ring back tone is heard in the HIs and streaming ends.


122
 Accept the call on the remote phone.
 Call is streamed to HIs and is heard in remote phone.


123
 End the call on Streamer.
 Call is ended and A2DP streaming is resumed.


124
 Call the test phone.
 Ringtone is heard in the HIs and A2DP streaming is ended.


125
 Accept the call on the Streamer.
 Call is streamed to HIs and is heard in remote phone.


126
 End call on remote phone.
 Call is ended and A2DP streaming is resumed.



127
 Stop A2DP streaming on Streamer.
 A2DP streaming ends and Streamer enters idle mode.
Note:Test phone does not A2DP streaming
128
 Start A2DP streaming on Streamer.
 A2DP streaming starts and is streamed to HIs.
Note:Test phone does not A2DP streaming
129
 Stop A2DP streaming in Streamer.
 A2DP streaming ends and Streamer enters idle mode.
Note:Test phone does not A2DP streaming
130
 Start TV-box streaming on Streamer.
 TV-box streaming starts and is streamed to HIs. Call handling: TV-box streaming.

131
 Call the test phone.
 Ringtone is heard in HIs and
if out-of-band ringing: TV-box streaming is attenuated.
if in-band ringing: TV-box streaming ends.


132
 Reject the call on Streamer.
 Call is rejected and TV-box streaming is resumed.


133
 Make an outgoing call from the test phone.
 Ring back tone is heard in the HIs and streaming ends.


134
 Accept the call on the remote phone.
 Call is streamed to HIs and is heard in remote phone.


135
 End the call on Streamer.
 Call is ended and TV-box streaming is resumed.


136
 Call the test phone.
 Ringtone is heard in the HIs and
if out-of-band ringing: TV-box streaming is attenuated.
if in-band ringing: TV-box streaming ends.


137
 Accept the call on Streamer. Call is streamed to HIs and is heard in remote phone.


138
 End the call on the remote phone.
 Call is ended and TV-box streaming is resumed.


139
 Stop TV-box streaming on Streamer.
 TV-box streaming ends and Streamer enters idle mode.


140
 Start E-mic streaming on Streamer.
 E-mic streaming starts and is streamed to HIs.
 Call handling: E-mic streaming.

141
 Call the test phone.
 Ringtone is heard in the HIs and
if out-of-band ringing: E-mic streaming is attenuated.
if in-band ringing: E-mic streaming ends.


142
 Reject the call on Streamer.
 Call is rejected and E-mic streaming is resumed.


143
 Make an outgoing call from the test phone.
 Ring back tone is heard in the HIs and streaming ends.


144
 Accept the call on the remote phone.
 Call is streamed to HIs and is heard in remote phone.


145
 End the call on Streamer.
 Call is ended and E-mic streaming is resumed.