I'm in the process of replacing my old 32bit Thinkpad with a new 64bit HP 15. As these things go, MPIDE, Fritzing, Eagle, and wxPerl all required libraries that weren't included in 14.04. After a lot of searching, all have been successfully installed. Below is the script I used for the wxWidgets/wxPerl installation. Hope it can be of some use to someone. Also cross posted to the wxPerl Wiki.
#!/bin/bash # # wxPerl Installation Script for Ubuntu 14.04LTS 64bit # # Author: Steve Cookson (Kbuntu 14.04LTS 64bit Version) # Modified By: James M. Lynes, Jr. # Last Modified: October 9, 2014 # # To Install: Save this file as ~/Perl/wxPerl-Installer.sh # Open a Terminal window # cd ~/Perl # sudo -s # sh -v wxPerl-Installer.sh > ~/Perl/wxPerl-Installer.log # # (sh wxPerl-Installer.sh if you don't want the log file create +d, about 2MB) # (all output will then go only to your screen) # # Notes: This script uses your system Perl(v5.18.2 in 14.04LTS). # The wxPerl Demo program installs into /usr/local/bin/wxperl_d +emo.pl # Installation log saved in ~/Perl/wxPerl-Installer.log. # Installation script run time saved in ~/Perl/wxPerl-Installer +.runtime. # Installs wxWidgets 3.0.1 below your home directory. # see the --wxWidgets-version=3.0.1 line below. # Modify this script to add any libraries or Perl Modules you r +equire. # Modify this script to put log files in other than ~/Perl/. # Uncomment optional git sections below to create local # repositories for wxWidgets and wxPerl. # Comment out the rm -rf Alien-wxWidgets and rm -rf wxPerl # to leave previous downloads intact. # root owns the files created by this script. Must be su to del +ete. # See below for creating a Launcher for wxperl_demo.pl # This script takes approximately 1 hour and 30 minutes to run # the first time on an HP 15 with Intel 2.16 GHz Quadcore. # Approximately 45 minutes there after since system librari +es # and cpan modules were installed/updated the first time. # # date # Note the start date/time date > ~/Perl/wxPerl-Installer.runtime # Log the start date/time # cd ~ # Install into your home directory # # Clean up prior installation(optional) # rm -rf Alien-wxWidgets # Optional clean + install rm -rf wxPerl # | find /usr | grep -i wx | grep -v -i python | grep -v -i soffice > rm_w +x.sh # | Collect wx files. Exclude wxpython, and soffice files sed -i -e 's/\/usr\//rm -rf \/usr\//g' rm_wx.sh # | + Build a rm command sh rm_wx.sh # | Remove them # # Reset packages in case there was a previous crash. # dpkg --configure -a # Configure all unpacked packages apt-get -y update # Resync package indexes apt-get -y upgrade # Install newest version of packages # # Install the dependencies first # # Install the Development Environment # apt-get -y install make # Needed for cpan apt-get -y install g++ apt-get -y install gcc apt-get -y install subversion # Needed for proper Alien-wxW +idgets and wxPerl apt-get -y install git # Needed for custom install Al +ien-wxWidgets and wxPerl apt-get -y install libgconf2-dev # Needed as wxMediaCtrl dependency apt-get -y install libgtk-3-dev # Needed as wxMediaCtrl depende +ncy apt-get -y install libexpat1-dev apt-get -y install libtiff4-dev apt-get -y install libpng12-dev apt-get -y install libjpeg-dev apt-get -y install libcairo2-dev apt-get -y install libxmu-dev apt-get -y install libwebkitgtk-dev # # Install the Video environment (wxMediaCtrl dependencies) # apt-get -y install libgstreamer0.10-dev # Needed for Alien- +wxWidgets and wxPerl apt-get -y install libgstreamer-plugins-base0.10-dev # Needed for A +lien-wxWidgets and wxPerl # apt-get -y install cups-pdf # Needed for P +DF printing apt-get -y install apparmor-utils # Confine an application' +s resources aa-complain cupsd # Report resource policy violatio +ns # # Install Perl modules # cpan -i ExtUtils::XSpp # Needed by wxPerl/Alien ins +tall cpan -i ExtUtils::ParseXS # Needed by wxPerl Makefile.P +L cpan -i XSLoader # Needed by wxPerl/Alien install cpan -i Encode # Needed for utf-8 cpan -i Test::Pod # ? cpan -i ExtUtils::MakeMaker # ? cpan -i Pod::Coverage # ? cpan -i Test::Pod::Coverage # ? # # Install OpenGL and Dependencies # apt-get -y install libglu1-mesa-dev apt-get -y install freeglut3-dev apt-get -y install mesa-common-dev # Needed by OpenGL apt-get -y install libsdl1.2-dev # ? apt-get -y remove libwxgtk2.8-dev apt-get -y install libwxgtk3.0-dev apt-get autoremove # Remove packages no longer need +ed cpan -i OpenGL # # Download Alien-wxWidgets(wxWidgets) # cd ~ svn co https://svn.code.sf.net/p/wxperl/code/Alien-wxWidgets/trunk Ali +en-wxWidgets #git clone https://github.com/SteveBz/Alien-wxWidgets # Optional l +ocation # # Compile wxWidgets # cd ~/Alien-wxWidgets perl Build.PL \ --wxWidgets-build=1 \ --wxWidgets-graphicscontext \ --wxWidgets-build-opengl=1 \ --wxWidgets-version=3.0.1 \ --wxWidgets-source=tar.bz2 \ --wxWidgets-unicode=1 \ --wx-unicode='yes' \ --wxWidgets-extraflags="--enable-graphics_ctx \ --disable-compat26 \ --enable-mediactrl \ --with-libjpeg=builtin \ --with-libpng=builtin \ --with-regex=builtin \ --with-libtiff=builtin \ --with-zlib=builtin \ --with-expat=builtin \ --with-libxpm=builtin \ --with-gtk=2\ --with-gtkprint" # # Build wxWidgets # perl Build # Baseline Alien-wxWidgets on git. # Optional local wxWidge +ts repository #git init # | #git add * # | #git commit -am "Adding Alien-wxWidgets baseline" # | perl Build install ldconfig # Configure dynamic linker run-time bi +ndings # # Download wxPerl # cd ~ svn co https://svn.code.sf.net/p/wxperl/code/wxPerl/trunk wxPerl #git clone https://github.com/SteveBz/wxPerl # Optional locati +on # # Build wxPerl # cd ~/wxPerl perl Makefile.PL make # Baseline wxPerl on git. # Optional local wxPerl repos +itory #git init # | #git add ~/wxPerl # | #git commit -am "Adding wxPerl baseline" # | make install # # Install predecessors for Wx::PdfDocuments # cd ~ cpan -i Wx::GLCanvas cpan -i Text::Patch cpan -i Wx::PdfDocument # # Install wxDemo # Installs into /usr/local/bin/wxp +erl_demo.pl # cpan -i Wx::Demo # # Install Locally Needed Modules(modify for your environment) # cpan -i App::cpanminus cpan -i Device::SerialPort apt-get -y install php5-gd # Needed for GD apt-get -y install libgd2-xpm-dev # Needed for GD cpan -i GD cpan -i GD::Text cpan -i GD::Graph # # Done # date # Note the ending date/time date >> ~/Perl/wxPerl-Installer.runtime # Log the ending da +te/time # # # To create a Launcher for wxperl_demo.pl # # Copy the lines below into ~/Perl/wxperl_demo.desktop # (Without the leading # and tab) # Make the file executable # (icon changes to wxpl.ico) # Drag the icon to the Launcher # Click on the icon to Launch wxperl_demo.pl # # # [Desktop Entry] # Name=wxPerl_Demo # Type=Application # Terminal=false # Icon=/home/your-user-name/wxPerl/wxpl.ico # Exec=perl /usr/local/bin/wxperl_demo.pl #
Update1:
Based on comments here at the Monestary and discussions with the original author, listed below is an updated version of the script.
#!/bin/bash # # wxPerl Installation Script for Ubuntu 14.04LTS 64bit # # Author: Steve Cookson (Kbuntu 14.04LTS 64bit Version) # Modified By: James M. Lynes, Jr. # Created: October 9, 2014 # Last Modified: October 26, 2014 # Change Log: 10/20/14 - Moved install files to ~/Perl, changed + root of find to /usr/local # 10/21/14 - Added warning message about clean-up section, +updated notes # 10/24/14 - Added clean-up-check.pl script and loading of +perl-doc module # 10/25/14 - Fixed icon path in launcher code # 10/26/14 - Fixed Logging, commented out the clean-up sect +ion # # # To Install: Open a Terminal Window # mkdir ~/Perl # cd ~/Perl # Save this file as ~/Perl/wxPerl-Installer.sh # sudo -s # sh -v wxPerl-Installer.sh 2>&1 >wxPerl-Installer.log | tee wx +Perl-Installer.screen # # (Stdout(mass of compiler output) goes to .log, Stderr goes to + the screen and .screen) # (Script start/stop times go to .runtime) # (sh wxPerl-Installer.sh if you don't want the log file create +d, about 2MB) # (all output will then go only to your screen) # # # Notes: This script uses your system Perl(v5.18.2 in 14.04LTS). # The wxPerl Demo program installs into /usr/local/bin/wxperl_d +emo.pl # Installation log saved in ~/Perl/wxPerl-Installer.log. # Installation script running time saved in ~/Perl/wxPerl-Insta +ller.runtime. # Installs wxWidgets 3.0.1 below your ~/Perl directory. # see the --wxWidgets-version=3.0.1 line below. # see http://sourceforge.net/p/wxperl/code/HEAD/tree/ for c +urrent revisions. # Modify this script to add any libraries or Perl Modules you r +equire. # Modify this script to put log files in other than ~/Perl/. # Uncomment optional git sections below to create local # repositories for wxWidgets and wxPerl. # Uncomment the optional clean-up section below # to clean-up from previous downloads. See WARNING below. # root owns the files created by this script. Must be su to del +ete. # See below for creating a Launcher for wxperl_demo.pl # This script takes approximately 1 hour and 30 minutes to run # the first time on an HP 15 with Intel 2.16 GHz Quadcore. # Approximately 58 minutes there after since system librari +es # and cpan modules are installed/updated the first time. # # # WARNING: On a new Ubuntu/wxPerl install, the clean-up section bel +ow deletes wx files from: # /usr/local/lib, /usr/local/bin, and /usr/local/share # If you have concerns about your specific installation, it is +suggested that # you run the clean-up-check.pl script below and check for any +items that you don't # want removed from your system and modify the find statement a +ccordingly. # # cd ~/Perl # Install into your ~/Perl directory date # Note the start date/time date > wxPerl-Installer.runtime # Log the start date/time # # # OPTIONAL clean-up from a previous installation attempt. # Not required for initial installation, comment out. # #rm -rf Alien-wxWidgets # Optional +clean-up before install #rm -rf wxPerl # | #find /usr/local | grep -i wx | grep -v -i python | grep -v -i soffice + > rm_wx.sh # | Collect wx files. # # | Exclude wxpython, and + soffice files #sed -i -e 's/\/usr\//rm -rf \/usr\//g' rm_wx.sh + # | Build a rm command #sh rm_wx.sh # | Remove them # # Reset packages in case there was a previous crash. # dpkg --configure -a # Configure all unpacked packages apt-get -y update # Resync package indexes apt-get -y upgrade # Install newest version of packages # # Install the dependencies first # # Install the Development Environment # apt-get -y install make # Needed for cpan apt-get -y install g++ apt-get -y install gcc apt-get -y install subversion # Needed for official Alien-w +xWidgets and wxPerl apt-get -y install git # Needed for custom install Al +ien-wxWidgets and wxPerl apt-get -y install libgconf2-dev # Needed as wxMediaCtrl dependency apt-get -y install libgtk-3-dev # Needed as wxMediaCtrl depende +ncy apt-get -y install libexpat1-dev apt-get -y install libtiff4-dev apt-get -y install libpng12-dev apt-get -y install libjpeg-dev apt-get -y install libcairo2-dev apt-get -y install libxmu-dev apt-get -y install libwebkitgtk-dev # # Install the Video environment (wxMediaCtrl dependencies) # apt-get -y install libgstreamer0.10-dev # Needed for Alien- +wxWidgets and wxPerl apt-get -y install libgstreamer-plugins-base0.10-dev # Needed for A +lien-wxWidgets and wxPerl # apt-get -y install cups-pdf # Needed for P +DF printing apt-get -y install apparmor-utils # Confine an application' +s resources aa-complain cupsd # Report resource policy violatio +ns # # Install Perl modules # cpan -i ExtUtils::XSpp # Needed by wxPerl/Alien ins +tall cpan -i ExtUtils::ParseXS # Needed by wxPerl Makefile.P +L cpan -i ExtUtils::MakeMaker # ? cpan -i XSLoader # Needed by wxPerl/Alien install cpan -i Encode # Needed for utf-8 cpan -i Test::Pod # ? cpan -i Pod::Coverage # ? cpan -i Test::Pod::Coverage # ? # # Install OpenGL and Dependencies # apt-get -y install libglu1-mesa-dev apt-get -y install freeglut3-dev apt-get -y install mesa-common-dev # Needed by OpenGL apt-get -y install libsdl1.2-dev # ? apt-get -y remove libwxgtk2.8-dev apt-get -y install libwxgtk3.0-dev apt-get autoremove # Remove packages no longer need +ed cpan -i OpenGL # # Download Alien-wxWidgets(wxWidgets) # cd ~/Perl svn co https://svn.code.sf.net/p/wxperl/code/Alien-wxWidgets/trunk Ali +en-wxWidgets #git clone https://github.com/SteveBz/Alien-wxWidgets # Optional l +ocation # # Compile wxWidgets # cd ~/Perl/Alien-wxWidgets perl Build.PL \ --wxWidgets-build=1 \ --wxWidgets-graphicscontext \ --wxWidgets-build-opengl=1 \ --wxWidgets-version=3.0.1 \ --wxWidgets-source=tar.bz2 \ --wxWidgets-unicode=1 \ --wx-unicode='yes' \ --wxWidgets-extraflags="--enable-graphics_ctx \ --disable-compat26 \ --enable-mediactrl \ --with-libjpeg=builtin \ --with-libpng=builtin \ --with-regex=builtin \ --with-libtiff=builtin \ --with-zlib=builtin \ --with-expat=builtin \ --with-libxpm=builtin \ --with-gtk=2\ --with-gtkprint" # # Build wxWidgets # perl Build # Baseline Alien-wxWidgets on git. # Optional local wxWidge +ts repository #git init # | #git add * # | #git commit -am "Adding Alien-wxWidgets baseline" # | perl Build install ldconfig # Configure dynamic linker run-time bi +ndings # # Download wxPerl # cd ~/Perl svn co https://svn.code.sf.net/p/wxperl/code/wxPerl/trunk wxPerl #git clone https://github.com/SteveBz/wxPerl # Optional locati +on # # Build wxPerl # cd ~/Perl/wxPerl perl Makefile.PL make # Baseline wxPerl on git. # Optional local wxPerl repos +itory #git init # | #git add ~/wxPerl # | #git commit -am "Adding wxPerl baseline" # | make install # # Install predecessors for Wx::PdfDocuments # cd ~ cpan -i Wx::GLCanvas cpan -i Text::Patch cpan -i Wx::PdfDocument # # Install wxDemo # Installs into /usr/local/bin/wxp +erl_demo.pl # cpan -i Wx::Demo # # Install Locally Needed Modules(modify for your environment) # cpan -i App::cpanminus cpan -i Device::SerialPort apt-get -y install php5-gd # Needed for GD apt-get -y install libgd2-xpm-dev # Needed for GD cpan -i GD cpan -i GD::Text cpan -i GD::Graph apt-get -y install perl-doc # perl docs not installed i +n Ubuntu distro # # Done # date # Note the ending date/time date >> ~/Perl/wxPerl-Installer.runtime # Log the ending da +te/time # # -------------------------------------------------------------------- +--------------- # #! /usr/bin/perl # # clean-up-check.pl # # Script to list the directories effected by the wxPerl-Install.sh scr +ipt clean-up section. # Related "wx" files from these directories will be deleted by the cle +an-up process. # Run this script prior to running the optional clean-up code in the i +nstaller. # # Created by: James M. Lynes, Jr # Creation Date: October 24, 2014 # Last Modified: October 24,2014 # #use strict; #use warnings; #use File::Basename; # #my %dirs; # Use a hash to remove duplicate directo +ry entrys # # Execute the "find" command used by the wxPerl-Installer.sh script # Each line is a path to a file that will be deleted # #my @lines = `find /usr/local | grep -i wx | grep -v -i python | grep +-v -i soffice`; # #foreach my $line (@lines) { # my $key=dirname($line); # $dirs{$key} += 1; # build hash with directory paths + as keys #} # duplicate key counts aren't being used # #my @k = sort keys %dirs; #foreach my $k (@k) { # print ($k, "\n"); # Sort and print the keys(unique +directory paths) #} # # -------------------------------------------------------------------- +--------------------------- # # To create a Launcher for wxperl_demo.pl # # Copy the lines below into ~/Perl/wxperl_demo.desktop # (Without the leading # and tab) # Make the file executable # (icon changes to wxpl.ico) # Drag the icon to the Launcher # Click on the icon to Launch wxperl_demo.pl # # # [Desktop Entry] # Name=wxPerl_Demo # Type=Application # Terminal=false # Icon=/home/your-user-name/Perl/wxPerl/wxpl.ico # Exec=perl /usr/local/bin/wxperl_demo.pl #
James
There's never enough time to do it right, but always enough time to do it over...
| For: | Use: | ||
| & | & | ||
| < | < | ||
| > | > | ||
| [ | [ | ||
| ] | ] |