comment on

Ok, this is basically a blatent plea for help from a monk who also knows his stuff when compiling modules under win32.

In hopes of testing a new project under 5.005, 5.6.1, and 5.8.4, I've installed those ActiveState versions of perl on my laptop running XP with Visual c++ installed. Now normally, one could just use their ppm utility to install prcompiled versions of modules. Unfortunately , their 5.005 only has DBI 1.14 available.

My goal was/is to install 1.37 on all three versions so I'm testing on a somewhat level playing field as far as DBI/Class::DBI, etc are concerned, and because it's the last version to support 5.005.

So far, perl Makefile.PL, nmake, and nmake test run just fine on 5.6.1 and 5.8.4. Unfortunately under 5.005, nmake completely craps out with stuff I'll never understand. Any monks out there know of a precompiled DBI for 5.005 win32?

Here's the output:

     C:\WINDOWS\perl5\bin\perl.exe -Ic:\windows\perl5\lib -Ic:\windows
+\perl5\lib -MExtUtils::Command -e mkpath blib\lib\DBI
mkdir blib
mkdir blib\lib
mkdir blib\lib\DBI
     C:\WINDOWS\perl5\bin\perl.exe -Ic:\windows\perl5\lib -Ic:\windows
+\perl5\lib -MExtUtils::Command -e rm_f blib\lib\DBI\Changes.pm
    C:\WINDOWS\perl5\bin\perl.exe -Ic:\windows\perl5\lib -Ic:\windows\
+perl5\lib -MExtUtils::Command -e cp Changes blib\lib\DBI\Changes.pm
     rem
mkdir blib\arch
mkdir blib\arch\auto
mkdir blib\arch\auto\DBI
mkdir blib\lib\auto
mkdir blib\lib\auto\DBI
mkdir blib\man1
mkdir blib\man3
cp lib/DBI/Profile.pm blib\lib\DBI\Profile.pm
cp Driver_xst.h blib\arch\auto\DBI\Driver_xst.h
cp lib/DBI/W32ODBC.pm blib\lib\DBI\W32ODBC.pm
cp lib/DBD/ExampleP.pm blib\lib\DBD\ExampleP.pm
cp lib/DBI/FAQ.pm blib\lib\DBI\FAQ.pm
cp lib/DBI/ProxyServer.pm blib\lib\DBI\ProxyServer.pm
cp lib/DBI/DBD/Metadata.pm blib\lib\DBI\DBD\Metadata.pm
cp lib/Bundle/DBI.pm blib\lib\Bundle\DBI.pm
cp lib/DBI/Const/GetInfo/ANSI.pm blib\lib\DBI\Const\GetInfo\ANSI.pm
cp lib/DBD/Proxy.pm blib\lib\DBD\Proxy.pm
cp lib/DBI/ProfileDumper.pm blib\lib\DBI\ProfileDumper.pm
cp DBIXS.h blib\arch\auto\DBI\DBIXS.h
cp lib/DBI/Const/GetInfoReturn.pm blib\lib\DBI\Const\GetInfoReturn.pm
cp dbd_xsh.h blib\arch\auto\DBI\dbd_xsh.h
cp lib/DBI/Const/GetInfoType.pm blib\lib\DBI\Const\GetInfoType.pm
cp dbi_sql.h blib\arch\auto\DBI\dbi_sql.h
cp lib/DBD/NullP.pm blib\lib\DBD\NullP.pm
cp lib/DBD/Sponge.pm blib\lib\DBD\Sponge.pm
cp lib/DBI/Const/GetInfo/ODBC.pm blib\lib\DBI\Const\GetInfo\ODBC.pm
cp lib/DBI/DBD.pm blib\lib\DBI\DBD.pm
cp Driver.xst blib\arch\auto\DBI\Driver.xst
cp lib/DBI/ProfileData.pm blib\lib\DBI\ProfileData.pm
cp DBI.pm blib\lib\DBI.pm
cp lib/Win32/DBIODBC.pm blib\lib\Win32\DBIODBC.pm
cp dbipport.h blib\arch\auto\DBI\dbipport.h
cp lib/DBI/ProfileDumper/Apache.pm blib\lib\DBI\ProfileDumper\Apache.p
+m
cp lib/DBI/PurePerl.pm blib\lib\DBI\PurePerl.pm
     rem

     rem
    C:\WINDOWS\perl5\bin\perl.exe -p -e "s/~DRIVER~/Perl/g" < blib\arc
+h\auto\DBI/Driver.xst > Perl.xsi
    C:\WINDOWS\perl5\bin\perl.exe -Ic:\windows\perl5\lib -Ic:\windows\
+perl5\lib C:\windows\perl5\lib\ExtUtils/xsubpp  -typemap C:\windows\p
+erl5\lib\ExtUtils\typemap -typemap typemap Perl.xs >xstmp.c && C:\WIN
+DOWS\perl5\bin\perl.exe -Ic:\windows\perl5\lib -Ic:\windows\perl5\lib
+ -MExtUtils::Command -e mv xstmp.c Perl.c
    cl.exe -c  -Od -MD -DNDEBUG -TP -GX -DWIN32 -D_CONSOLE -DNO_STRICT
+ -DHAVE_DES_FCRYPT -DPERL_OBJECT -Od -MD -DNDEBUG -TP -GX     -DVERSI
+ON=\"1.37\"  -DXS_VERSION=\"1.37\"  -IC:\windows\perl5\lib\CORE -DDBI
+_NO_THREADS Perl.c
Perl.c
    C:\WINDOWS\perl5\bin\perl.exe -Ic:\windows\perl5\lib -Ic:\windows\
+perl5\lib C:\windows\perl5\lib\ExtUtils/xsubpp  -typemap C:\windows\p
+erl5\lib\ExtUtils\typemap -typemap typemap DBI.xs >xstmp.c && C:\WIND
+OWS\perl5\bin\perl.exe -Ic:\windows\perl5\lib -Ic:\windows\perl5\lib 
+-MExtUtils::Command -e mv xstmp.c DBI.c
    cl.exe -c  -Od -MD -DNDEBUG -TP -GX -DWIN32 -D_CONSOLE -DNO_STRICT
+ -DHAVE_DES_FCRYPT -DPERL_OBJECT -Od -MD -DNDEBUG -TP -GX     -DVERSI
+ON=\"1.37\"  -DXS_VERSION=\"1.37\"  -IC:\windows\perl5\lib\CORE -DDBI
+_NO_THREADS DBI.c
DBI.c
DBI.xs(51) : warning C4273: 'getpid' : inconsistent dll linkage.  dlle
+xport assumed.
DBI.xs(66) : error C2951: template declarations are only permitted at 
+global or namespace scope
DBI.xs(66) : error C2143: syntax error : missing ')' before 'newline'
DBI.xs(66) : error C2143: syntax error : missing ';' before 'newline'
DBI.xs(66) : error C2143: syntax error : missing ';' before 'newline'
DBI.xs(66) : error C2059: syntax error : ')'
DBI.xs(709) : error C2951: template declarations are only permitted at
+ global or namespace scope
DBI.xs(709) : error C2143: syntax error : missing ')' before 'newline'
DBI.xs(709) : error C2143: syntax error : missing ';' before 'newline'
DBI.xs(709) : error C2143: syntax error : missing ';' before 'newline'
DBI.xs(709) : error C2059: syntax error : ')'
DBI.xs(710) : error C2143: syntax error : missing ';' before '{'
DBI.xs(710) : error C2447: missing function header (old-style formal l
+ist?)
DBI.xs(974) : error C2350: 'CPerlObj::dump' is not a static member
DBI.xs(1015) : error C2248: 'dump' : cannot access protected member de
+clared in class 'CPerlObj'
        C:\windows\perl5\lib\CORE\proto.h(814) : see declaration of 'd
+ump'
DBI.xs(1015) : error C2659: '=' : overloaded function as left operand
DBI.xs(1021) : error C2248: 'dump' : cannot access protected member de
+clared in class 'CPerlObj'
        C:\windows\perl5\lib\CORE\proto.h(814) : see declaration of 'd
+ump'
DBI.xs(1021) : error C2659: '=' : overloaded function as left operand
DBI.xs(1027) : error C2248: 'dump' : cannot access protected member de
+clared in class 'CPerlObj'
        C:\windows\perl5\lib\CORE\proto.h(814) : see declaration of 'd
+ump'
DBI.xs(1027) : error C2659: '=' : overloaded function as left operand
DBI.xs(1031) : warning C4551: function call missing argument list
DBI.xs(1031) : error C2248: 'dump' : cannot access protected member de
+clared in class 'CPerlObj'
        C:\windows\perl5\lib\CORE\proto.h(814) : see declaration of 'd
+ump'
DBI.xs(1121) : error C2143: syntax error : missing ',' before '->'
DBI.xs(1121) : error C2059: syntax error : '->'
DBI.xs(1123) : error C2039: 'Perl_hv_fetch' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1123) : error C2039: 'PL_modglobal' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1126) : error C2039: 'Perl_sv_2iv' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1130) : error C2065: 'attribs' : undeclared identifier
DBI.xs(1131) : error C2039: 'Perl_croak' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1136) : error C2039: 'Perl_ref' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1136) : error C2227: left of '->sv_flags' must point to class/s
+truct/union
DBI.xs(1136) : error C2039: 'Perl_ref' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1136) : error C2227: left of '->sv_any' must point to class/str
+uct/union
DBI.xs(1136) : error C2227: left of '->xrv_rv' must point to class/str
+uct/union
DBI.xs(1136) : error C2227: left of '->sv_flags' must point to class/s
+truct/union
DBI.xs(1137) : error C2039: 'Perl_croak' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1138) : error C2039: 'Perl_ref' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1144) : error C2039: 'fprintf' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1145) : error C2039: 'Perl_ref' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1148) : error C2039: 'Perl_croak' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1153) : error C2039: 'Perl_av_store' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1153) : error C2039: 'PL_Sv' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1153) : error C2039: 'Perl_ref' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1153) : error C2227: left of '->sv_any' must point to class/str
+uct/union
DBI.xs(1153) : error C2227: left of '->xrv_rv' must point to class/str
+uct/union
DBI.xs(1153) : error C2039: 'PL_Sv' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1153) : error C2039: 'PL_Sv' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1153) : error C2227: left of '->sv_refcnt' must point to class/
+struct/union
DBI.xs(1153) : error C2039: 'PL_Sv' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(1262) : warning C4518: '$S6 ' : storage-class or type specifier
+(s) unexpected here; ignored
DBI.xs(1262) : error C2059: syntax error : '='
DBI.xs(1272) : error C2226: syntax error : unexpected type '$S7'
DBI.xs(1277) : error C2144: syntax error : missing ')' before type '$S
+8'
DBI.xs(1277) : error C2660: 'Perl_newSVpv' : function does not take 0 
+parameters
DBI.xs(1277) : error C2059: syntax error : ')'
DBI.xs(1292) : error C2144: syntax error : missing ')' before type '$S
+9'
DBI.xs(1292) : error C2660: 'perl_require_pv' : function does not take
+ 0 parameters
DBI.xs(1292) : error C2059: syntax error : ')'
DBI.xs(1293) : error C2144: syntax error : missing ')' before type '$S
+10'
DBI.xs(1293) : error C2660: 'Perl_gv_stashpv' : function does not take
+ 0 parameters
DBI.xs(1293) : error C2059: syntax error : ')'
DBI.xs(2407) : error C2198: 'void (__cdecl *)(struct cv *,class CPerlO
+bj *)' : too few actual parameters
DBI.c(3183) : warning C4518: '$S11 ' : storage-class or type specifier
+(s) unexpected here; ignored
DBI.c(3183) : error C2059: syntax error : '='
DBI.xs(3191) : error C2513: 'class XS_DBI__install_method::$S12' : no 
+variable declared before '='
DBI.xs(3191) : error C2226: syntax error : unexpected type '$S13'
DBI.c(3639) : error C2143: syntax error : missing ';' before '->'
DBI.c(3639) : error C2143: syntax error : missing ';' before '->'
DBI.c(3645) : error C2039: 'PL_stack_base' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(3515) : error C2039: 'Perl_croak' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(3515) : error C2039: 'Perl_sv_2pv' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(3515) : error C2039: 'Perl_sv_2pv' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(3516) : error C2039: 'PL_stack_base' : is not a member of 'sv'

        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(3516) : error C2039: 'Perl_ref' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(3516) : error C2660: 'dbih_sth_bind_col' : function does not ta
+ke 4 parameters
DBI.xs(3516) : error C2039: 'PL_sv_yes' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(3516) : error C2039: 'PL_sv_no' : is not a member of 'sv'
        C:\windows\perl5\lib\CORE\sv.h(35) : see declaration of 'sv'
DBI.xs(3544) : error C2660: 'dbih_sth_bind_col' : function does not ta
+ke 4 parameters
[download]

In reply to DBI Compile Under Win32 Perl 5.005_03 by jk2addict

Posts are HTML formatted. Put <p> </p> tags around your paragraphs. Put <code> </code> tags around your code and data!

Titles consisting of a single word are discouraged, and in most cases are disallowed outright.

Read Where should I post X? if you're not absolutely sure you're posting in the right place.

Please read these before you post! —

Posts may use any of the Perl Monks Approved HTML tags:

a, abbr, b, big, blockquote, br, caption, center, col, colgroup, dd, del, details, div, dl, dt, em, font, h1, h2, h3, h4, h5, h6, hr, i, ins, li, ol, p, pre, readmore, small, span, spoiler, strike, strong, sub, summary, sup, table, tbody, td, tfoot, th, thead, tr, tt, u, ul, wbr

You may need to use entities for some characters, as follows. (Exception: Within code tags, you can put the characters literally.)

	For:		Use:
	&		`&`
	<		`<`
	>		`>`
	[		`[`
	]		`]`

Link using PerlMonks shortcuts! What shortcuts can I use for linking?

See Writeup Formatting Tips and other pages linked from there for more info.