This is p.txt, I put m.txt in the next one. Thank you 

Makefile.PL: acceptable OpenGL not found, setting $PDL::Config{USE_POG
+L} => 0
making PDL_B...
making PDL_S...
making PDL_US...
making PDL_L...
making PDL_LL...
making PDL_F...
making PDL_D...
Extracting Types.pm
Warning: prerequisite Astro::FITS::Header 0 not found.
Warning: prerequisite Inline 0.43 not found.
Warning: prerequisite OpenGL 0.62 not found.
Checking if your kit is complete...
Looks good
Warning: prerequisite Inline 0.43 not found.
Writing Makefile for PDL::pod
Writing Makefile for Inline
Writing Makefile for PDL::PP
Writing Makefile for PDL::NiceSlice
Trying to figure out POSIX threads support ...
    Saw pthread.h. Fine.
    Nope, your perl was not linked against pthread library
    You need to include -lpthread in your perl libs configuration
    ==> PDL will be built without POSIX thread support.
    ==> *NOTE*: PDL threads are unrelated to perl threads (usethreads=
+y)!
    ==> Enabling perl threads will not help!

Trying to figure out endian-ness of machine... It is little endian
Writing Makefile for PDL::Core

    Congratulations - building PDL with bad value support (WITH_BADVAL
+=1)
    + using -FLT_MAX/-DBL_MAX for floating-point bad values

Writing Makefile for PDL::Bad
Writing Makefile for PDL::Ops
Writing Makefile for PDL::Ufunc
Writing Makefile for PDL::Primitive
Writing Makefile for PDL::Slices
Writing Makefile for PDL::Tests
Source of functions
System:       acosh asinh atanh erf infinity j0 j1 jn rint y1
Distribution: erfc erfi fixy0 fixyn nan ndtri polyroots

Writing Makefile for PDL::Math
Writing Makefile for PDL::MatrixOps
Writing Makefile for PDL::Complex
Writing Makefile for PDL
Writing Makefile for PDL::Demos
Writing Makefile for PDL::Pod::Parser
Writing Makefile for PDL::Doc

   WITH_3D: Looking for xdpyinfo to check GLX ..
   WITH_3D: Found xdpyinfo, now checking for GLX extension
xdpyinfo:  unable to open display "".

      Not building PDL::Graphics::Karma, turn on WITH_KARMA if this is
+ incorrect

writing dummy Makefile
Cannot find plplot library (libplplotd.dll), skipping PDL::Graphics::P
+Lplot

      Not building PDL::Graphics::PLplot


   WITH_3D: No GLX extension found for this X server, won't build TriD
+ or OpenGL
   WITH_3D: Turn on WITH_3D if this is incorrect.

Writing Makefile for PDL::Graphics::PGPLOT::Window
Writing Makefile for PDL::Graphics::PGPLOT
Writing Makefile for PDL::Graphics::LUT::tables::DATA
Writing Makefile for PDL::Graphics::LUT::ramps::DATA
Writing Makefile for PDL::Graphics::LUT
Writing Makefile for PDL::Graphics::IIS

Checking PDL::Graphics::PLplot...
found_plplot is 1
Writing Makefile for PDL::Graphics::Limits
Writing Makefile for PDL
exiting graphics...

   Not building PDL::IO::Browser. Turn on WITH_IO_BROWSER if this is i
+ncorrect.

Writing Makefile for PDL::IO::FastRaw
Writing Makefile for PDL::IO::Misc
Writing Makefile for PDL::IO::FlexRaw
Writing Makefile for PDL::IO::Pnm
Writing Makefile for PDL::IO::NDF
Writing Makefile for PDL::IO::Storable
Writing Makefile for PDL::IO::FITS
writing dummy Makefile
Cannot find hdf library, libdf.a.
Please add the correct library path to Makefile.PL or install HDF
Cannot find hdf header file, hdf.h.
Please add the correct library path to Makefile.PL or install HDF

 Skipping build of PDL::IO::HDF.

writing dummy Makefile
Cannot find GD library, .
Please add the correct library path to Makefile.PL or install GD
.Cannot find GD header file, .
Please add the correct library path to Makefile.PL or install GD.

 Skipping build of PDL::IO::GD.

writing dummy Makefile

Can't locate ExtUtils/F77.pm in @INC (@INC contains: /usr/lib/perl5/5.
+10/i686-cygwin /usr/lib/perl5/5.10 /usr/lib/perl5/site_perl/5.10/i686
+-cygwin /usr/lib/perl5/site_perl/5.10 /usr/lib/perl5/vendor_perl/5.10
+/i686-cygwin /usr/lib/perl5/vendor_perl/5.10 /usr/lib/perl5/vendor_pe
+rl/5.10 /usr/lib/perl5/site_perl/5.8 /usr/lib/perl5/vendor_perl/5.8 /
+cygdrive/c/Documents and Settings/Mahzari/Desktop/PDL/PDL-2.4.6 /cygd
+rive/c/Documents and Settings/Mahzari/Desktop/PDL/PDL-2.4.6/Lib .) at
+ (eval 68) line 2.
BEGIN failed--compilation aborted at (eval 68) line 2.

    ExtUtils::F77 module not found. Ought not build PDL::Slatec

Final $hdf_defs flags: '-DNDEBUG -D_BSD_SOURCE -DLINUX -DGCC32'

Writing Makefile for PDL::IO::Dicom
Writing Makefile for PDL::IO
Writing Makefile for PDL::Opt::Simplex
Writing Makefile for PDL::Opt
Writing Makefile for PDL::ImageRGB
Writing Makefile for PDL::Fit::Gaussian
Writing Makefile for PDL::Fit
Writing Makefile for PDL::FFT
Writing Makefile for PDL::Filter
Writing Makefile for PDL::Image2D
Writing Makefile for PDL::ImageND
Writing Makefile for PDL::CallExt
writing dummy Makefile
    no GSL link info (libgsl probably not available)
    no GSL include info (libgsl probably not available)

    no GSL version info found (gsl-config not installed?)


   Not building GSL modules: GSL version UNKNOWN VERSION found, need a
+t least 1.3

writing dummy Makefile

 Skipping build of PDL::FFTW.

writing dummy Makefile
 Testing support libraries for PDL::GIS::Proj:
    Cannot find Proj library, libproj.a.
    Please add the correct library path to Makefile.PL or install Proj
+.
    Cannot find Proj header file, proj_api.h.
    Please add the correct library path to Makefile.PL or install Proj
+.
 Skipping build of PDL::GIS::Proj.

writing dummy Makefile
 Testing support libraries for PDL::Transform::Proj4:
    Cannot find Proj4 library, libproj.a.
    Please add the correct library path to Makefile.PL or install Proj
+4.
    Cannot find Proj4 header file, proj_api.h.
    Please add the correct library path to Makefile.PL or install Proj
+4.
 Skipping build of PDL::Transform::Proj4.

writing dummy Makefile

Can't locate ExtUtils/F77.pm in @INC (@INC contains: /usr/lib/perl5/5.
+10/i686-cygwin /usr/lib/perl5/5.10 /usr/lib/perl5/site_perl/5.10/i686
+-cygwin /usr/lib/perl5/site_perl/5.10 /usr/lib/perl5/vendor_perl/5.10
+/i686-cygwin /usr/lib/perl5/vendor_perl/5.10 /usr/lib/perl5/vendor_pe
+rl/5.10 /usr/lib/perl5/site_perl/5.8 /usr/lib/perl5/vendor_perl/5.8 /
+cygdrive/c/Documents and Settings/Mahzari/Desktop/PDL/PDL-2.4.6 /cygd
+rive/c/Documents and Settings/Mahzari/Desktop/PDL/PDL-2.4.6/Lib .) at
+ (eval 72) line 2.
BEGIN failed--compilation aborted at (eval 72) line 2.

    ExtUtils::F77 module not found. Ought not build PDL::Minuit

writing dummy Makefile
Writing Basic/Core/Config.pm

* Gentle warning from PDL::IO::FITS: *

Hmmm. You don't appear to have the Astro::FITS::Header module installe
+d.
You'll be able to read and write FITS files anyway, but FITS support i
+s
greatly improved if you install it.

You can get the latest Astro::FITS::Header module from CPAN --
point your browser at http://www.cpan.org.

Writing Makefile for PDL::Lib::GIS
Writing Makefile for PDL::Transform::Cartography
Writing Makefile for PDL::Transform
Writing Makefile for PDL::Lib
Writing Makefile for PDL

[download]

In reply to Re^8: PDL installation by mili3431
in thread PDL installation by mili3431

Title:
Use:  <p> text here (a paragraph) </p>
and:  <code> code here </code>
to format your post, it's "PerlMonks-approved HTML":


  • Posts are HTML formatted. Put <p> </p> tags around your paragraphs. Put <code> </code> tags around your code and data!
  • Titles consisting of a single word are discouraged, and in most cases are disallowed outright.
  • Read Where should I post X? if you're not absolutely sure you're posting in the right place.
  • Please read these before you post! —
  • Posts may use any of the Perl Monks Approved HTML tags:
    a, abbr, b, big, blockquote, br, caption, center, col, colgroup, dd, del, details, div, dl, dt, em, font, h1, h2, h3, h4, h5, h6, hr, i, ins, li, ol, p, pre, readmore, small, span, spoiler, strike, strong, sub, summary, sup, table, tbody, td, tfoot, th, thead, tr, tt, u, ul, wbr
  • You may need to use entities for some characters, as follows. (Exception: Within code tags, you can put the characters literally.)
            For:     Use:
    & &amp;
    < &lt;
    > &gt;
    [ &#91;
    ] &#93;
  • Link using PerlMonks shortcuts! What shortcuts can I use for linking?
  • See Writeup Formatting Tips and other pages linked from there for more info.