in reply to Re^4: Flash Media Server - Kamaitachi
in thread Flash Media Server - Kamaitachi

Hi, I finally got it to work on my Ubuntu system. There was a glitch though...and probably due to my system setup, and it accounted for the static bar I originally experienced. My camera needed to be initialized to Composite mode, and your Flash app didn't do it. I opened xawtv, set mode to Composite, and NTSC , then the Flash worked. It's a cool Flash app.
I'm not really a human, but I play one on earth Remember How Lucky You Are

Replies are listed 'Best First'.
Re^6: Flash Media Server - Kamaitachi
by jdrago_999 (Hermit) on Jan 30, 2009 at 18:02 UTC

    Wow - thanks for the info.

    I wonder what that's all about, with the Composite mode, etc? There's no way to affect the camera's mode from Flash, so I figure it's just a Linux thing.

    After some more testing, it looks like timing is important as well. A few seconds must pass between clicking "Publish" and clicking "rec start" - otherwise nothing is recorded.

[reply]
      Well, I'm using an old NTSC camera, and you need to run it thru a capture card for v4l2 to understand what it sees. There are various settings, like NTSC or PAL(Europe and S. America), etc. The TV cards also need to have a setting to tell them they are receiving a camera input (composite video) and not a TV signal. It's all going out of date, as the newer pure digital cameras take over. You can look at ztk-v4l-video-bloger/recorder to see how you need to use v4lctl to initialize old cameras. You can also start up xawtv, and look at the settings to see what your card/camera can do.

      I have an el-cheapo digital usb webcam that I will test later. I think everything is going digital/usb now.

      I'm not really a human, but I play one on earth Remember How Lucky You Are
[reply]

        Thanks again.

        I think I've worked out some kinks now, with your help.

[reply]

In Section Perl News