If you have a question on how to do something in Perl, or you need a Perl solution to an actual real-life problem, or you're unsure why something you've tried just isn't working... then this section is the place to ask.

However, you might consider asking in the chatterbox first (if you're a registered user). The response time tends to be quicker, and if it turns out that the problem/solutions are too much for the cb to handle, the kind monks will be sure to direct you here.

Post a new question!

User Questions
Installation of 2 module prerequisites failing - using cpanm
No replies — Read more | Post response 		by Intrepid
on Apr 28, 2026 at 17:52

    Hi Monks. I don't know if anyone can help me with this, but I'll ask anyhow.

    I'm doing this on the commandline:

    
$ PERL5LIB=~/build/perl-testing-libs/lib/perl5 cpanm --self-contained \
--exclude-vendor -L ~/build/perl-testing-libs --wget --skip-satisfied \
--interactive --verbose YAML::LibYAML

    The resulting message is

    
! Installing the dependencies failed: Module 'Test::More' is not installed
! Bailing out the installation for File-Temp-0.2312.
! Installing the dependencies failed: Module 'File::Temp' is not installed

    When I try to build the two required modules alone, I can't get a succcessful installation. What's going on?

    EDIT

    Sorry,I was tired and in a hurry and didn't give much contextual info. My System and my Perl are:
    OS: CYGWIN_NT-10.0-26200; cpu type: x86_64; |12| cores, cpus present: |1|
    Perl version v5.40.3, CygPerl.

        – Soren

    Apr 28, 2026 at 21:46 UTC

    A just machine to make big decisions
    Programmed by fellows (and gals) with compassion and vision
    We'll be clean when their work is done
    We'll be eternally free yes, and eternally young
    Donald Fagen —> I.G.Y.
    (Slightly modified for inclusiveness)
Perl Inheritance Not Working as Expected
1 direct reply — Read more / Contribute 		by InfiniteSilence
on Apr 28, 2026 at 14:24

    So I write a response to this blogs.perl.org post titled, 'Who Tests the Tester? Me!!!' by lichtkind and almost as soon as I hit the submit button I take a closer look at my test and say, 'oops...I forgot to change the class to the new subclass...I'll just change that and rerun my tests. No problem...'

    t/01.t ............ ok
t/hsltupletest.t .. 1/? 
#   Failed test 'A is now between 0 and 360 since it is degrees'
#   at t/hsltupletest.t line 22.
# Looks like you failed 1 test of 6.
t/hsltupletest.t .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/6 subtests 
t/tupletest.t ..... ok

Test Summary Report
-------------------
t/hsltupletest.t (Wstat: 256 (exited 1) Tests: 6 Failed: 1)
  Failed test:  6
  Non-zero exit status: 1
Files=3, Tests=12,  0 wallclock secs ( 0.08 usr  0.02 sys +  0.49 cusr
+  0.07 csys =  0.66 CPU)
Result: FAIL

    [download]

    Denied!

    Debugging reveals something extremely strange... 

    main::(./t/hsltupletest.t:8):    my $prospectTupleRef = [qw~a b c~];
  DB<1> n
main::(./t/hsltupletest.t:10):    my $tuple = HSLTuple->new($prospectT
+upleRef, 'HSL');
  DB<1> n
main::(./t/hsltupletest.t:12):    ok($tuple->is_valid($prospectTupleRe
+f) == 0, "A B C is an array but not an HSL tuple");
  DB<1> x $tuple
0  FakeTuple=HASH(0x5b2e6ee12a70)
   'axes' => 3
   'space_name' => 'HSL'
   'tupledata' => undef
  DB<2>

    [download]

    What? It says it is a FakeTuple even though I clearly used the HSLTuple! Unsurprisingly, it calls the is_valid() method of FakeTuple: 

    main::(./t/hsltupletest.t:20):    ok($tuple->is_valid([qw~361 62 99~])
+ == 0 , "A must be between 0 and 360 since it is degrees");
  DB<2> s
FakeTuple::is_valid(FakeTuple.pm:34):
34:        my ($self, $data2Check) = @_;
  DB<2> l
34==>        my ($self, $data2Check) = @_;
35:        my $result = 0;
36:        for(0..2){$result++ if ($data2Check->[$_]=~m/\d+/ && 
37                         $data2Check->[$_] >= 0    &&
38                     $data2Check->[$_] <= 100)};
39         
40:        return ( $result == $self->no_of_axes() ) ? 1 : 0;
41     }
42     
43     # code (loosely) borrowed from Basis.pm
  DB<2>

    [download]

    Why did it not use my derived class and call my overridden method?

    Celebrate Intellectual Diversity

parentheses missing in action
1 direct reply — Read more / Contribute 		by Anonymous Monk
on Apr 28, 2026 at 14:15
    I'm using autodie so this seemed reasonable: 
    open my $pipe, $cmds;
    But perl warns: Parentheses missing around "my" list at ...

    It works but it warns and I know why. All of the following work too and silence the warning: 

    open (my  $pipe,  $cmds);
open  my ($pipe), $cmds;
open  my  $pipe, ($cmds);
    1. seems most correct.
    2. also seems correctish.
    3. what is going on here?
Where are the perldelta files for development releases?
1 direct reply — Read more / Contribute 		by Anonymous Monk
on Apr 28, 2026 at 03:03
Interpolate variable into regexp at time of definition rather than execution, as a filter for Path::Iterator::Rule
2 direct replies — Read more / Contribute 		by ecm
on Apr 27, 2026 at 15:27

    I am attempting to use a Path::Iterator::Rule "Custom rule subroutine".

    I have a regexp during the buildup of my rules, which determines whether the custom rule subroutine is used. If it indicates to use the subroutine, then its capture group $1 at this point holds some text that I want to match in the subroutine to filter for certain pathnames.

    With the naive approach, it seems that the $1 or $var variable in my regexp is only expanded at the time of the regexp/subroutine being run. At this point, the variable is no longer valid and could have been overwritten by some other value. Naive code:

    my $rule = Path::Iterator::Rule->new;
if ($id =~ /^([0-9A-F]{2})/) {
  my $int = $1;
  $rule->and( sub { m#/INT $int# } );
}

    [download]

    Resulting errors are many times this line:

    Use of uninitialized value $int in regexp compilation at [redacted]/proj/intlist/intlist.pl line 1167.

    I found that it appears to work if I use a "postponed" regular subexpression like so:

    my $rule = Path::Iterator::Rule->new;
if ($id =~ /^([0-9A-F]{2})/) {
  my $int = $1;
  $rule->and( sub { m#/INT (??{ "$int" })# } );
}

    [download]

    Is this a correct approach? Are there other ways to interpolate a variable at the time of adding the custom rule subroutine, so that the rule doesn't refer to the variable later but rather uses the text that it used to hold?
Is it OK for Time::HiRes::time() to report the time differently per thread?
4 direct replies — Read more / Contribute 		by Anonymous Monk
on Apr 23, 2026 at 08:20

    I would expect all "next" times to be higher than "first" times (unless I messed it with semaphores), but on some invocations it is not the case. Why does this happen? This is Strawberry 5.42

    use strict;
use warnings;
no warnings 'void';

use threads;
use Thread::Semaphore ;
use Time::HiRes 'time';

my $t = time;

my @s = map Thread::Semaphore-> new( 0 ), 1 .. 4;

my @t = map async {
    my $id = threads-> tid - 1;
    $s[ $id ]-> down;
    
    sin for 1 .. 1e7;   # work per thread
    
    printf "first, %d %.3f\n", $id, time - $t;
    $s[ $id ]-> up( 4 );
    $_-> down for @s;
    printf "next,  %d %.3f\n", $id, time - $t;
}, 1 .. 4;

sin for 1 .. 1e7;       # initial work

$_-> up for @s;
$_-> join for @t;

__END__

first, 2 1.824
first, 3 1.824
first, 1 1.824
first, 0 1.832
next,  1 1.826
next,  3 1.828
next,  2 1.832
next,  0 1.832

    [download]
Modern Subroutine Signature Requires Perl Version
6 direct replies — Read more / Contribute 		by InfiniteSilence
on Apr 21, 2026 at 10:01

    I feel like this question has been asked in the past but I could not find it in the search.

    So I am running this code snippet from Dave Cross' blog titled, Summarizing a Month of Git Activity with Perl (and a Little Help from AI) and I ran into a new feature of Perl -- subroutines that take named arguments. We had prototypes in the past but people said they were wonky so I avoided them for the most part.

    So here I am trying to use this thing and I start getting a weird error: 

    
#!/usr/bin/perl -w
use strict;

# LEARN: weird -- the method has named parameters ... since v5.36

sub commits_for_month ($repo, $since, $until) {
  my $cmd = sprintf(
    q{git -C %s log --since="%s" --until="%s" --pretty=format:"%%s"},
    $repo, $since, $until
  );

  my @commits = `$cmd`;
  chomp @commits;

  return @commits;
}

1;

    [download]

    I get...,

    llegal character in prototype for main::commits_for_month : $repo, $si
+nce, $until at ./gitter.pl line 7.
Global symbol "$repo" requires explicit package name (did you forget t
+o declare "my $repo"?) at ./gitter.pl line 10.
Global symbol "$since" requires explicit package name (did you forget 
+to declare "my $since"?) at ./gitter.pl line 10.
Global symbol "$until" requires explicit package name (did you forget 
+to declare "my $until"?) at ./gitter.pl line 11.
./gitter.pl had compilation errors.

    [download]

    My Perl version:

    This is perl 5, version 40, subversion 1 (v5.40.1) built for x86_64-li
+nux-thread-multi
...

    [download]

    When I look this up using Google's handy-dandy AI it tells me all about the normal way to get passed-in parameters in a subroutine and then tells me that this new syntax is available in v5.36. So I add, 

    use v5.36;

    [download]

    To my code and voila, the code compiles, 

     perl -c ./gitter.pl
./gitter.pl syntax OK

    [download]

    Dave's example didn't specify the version like this in his code. Is there something in my environment I am supposed to set to avoid this from happening?

    Celebrate Intellectual Diversity

Failed 2 tests on CygPerl for Test2::Harness; would a newer perl pass?
2 direct replies — Read more / Contribute 		by Intrepid
on Apr 15, 2026 at 14:44

    I tried installing Test2::Harness and a couple tests failed. I am not totally understanding the output and if someone knowledgeable could interpret this for me I'd be grateful.

    

Running make test for EXODIST/Test2-Harness-1.000170.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl.exe" "-Iblib/lib" "-Iblib/arch" test.pl

  FAIL    job 46  +~find_in_updir
  PASS    job 46    + Found file in expected spot
  FAIL    job 46    + Found file in expected spot
  DEBUG   job 46    | t/unit/App/Yath/Util.t line 133
(  DIAG  )  job 46    | +---------+----+-----------------------------------------------------------+
(  DIAG  )  job 46    | | GOT     | OP | CHECK                                                     |
(  DIAG  )  job 46    | +---------+----+-----------------------------------------------------------+
(  DIAG  )  job 46    | | <UNDEF> | =~ | (?^:\/cygdrive\/c\/Users\/somia\/AppData\/Local\/Temp\/ya |
(  DIAG  )  job 46    | |         |    | th\-149000\-j3p7oZ\/tmp\/FJbCQG\/17DQP5yPmV\/thefile$)    |
(  DIAG  )  job 46    | +---------+----+-----------------------------------------------------------+
  PLAN    job 46    | Expected assertions: 2
            job 46    ^
(  DIAG  )  job 46    Failed test 'find_in_updir'
(  DIAG  )  job 46    at t/unit/App/Yath/Util.t line 134.

-------------------------------------------------------------------------------------------

  FAIL    job 57  + /cygdrive/c/Users/somia/AppData/Local/Temp has correct permissions
  DEBUG   job 57    t2/tmp_perms.t line 36

The following jobs failed at least once:
+--------------------+-----------+--------------------+--------------------+
| Job ID             | Times Run | Test File          | Succeeded Eventual |
|                    |           |                    | ly?                |
+--------------------+-----------+--------------------+--------------------+
|                    |           |                    |                    |
| 796D54CF-8067-1014 | 2         | t/unit/App/Yath/Ut | NO                 |
| -B37C-A366FD41E411 |           | il.t               |                    |
|                    |           |                    |                    |
| 7973C25C-8067-1014 | 2         | t2/tmp_perms.t     | NO                 |
| -B37C-A366FD41E411 |           |                    |                    |
+--------------------+-----------+--------------------+--------------------+

The following jobs failed:
+---------------------------------+------------------------+---------------+
| Job ID                          | Test File              | Subtests      |
+---------------------------------+------------------------+---------------+
| 796D54CF-8067-1014-B37C-A366FD4 | t/unit/App/Yath/Util.t | find_in_updir |
| 1E411                           |                        |               |
|                                 |                        |               |
| 7973C25C-8067-1014-B37C-A366FD4 | t2/tmp_perms.t         |               |
| 1E411                           |                        |               |
+---------------------------------+------------------------+---------------+

                                    Yath Result Summary
-------------------------------------------------------------------------------------------
     Fail Count: 2
     File Count: 91
Assertion Count: 1996
      Wall Time: 632.81 seconds
       CPU Time: 1960.39 seconds (usr: 3.67s | sys: 1.70s | cusr: 459.45s | csys: 1495.57s)
      CPU Usage: 309%
    -->  Result: FAILED  <--

yath exited with 256 yath exited with 256
not ok 1 - Passed tests when run by yath (allow fork)
not ok 2 - Passed tests when run by yath (no fork)

-------------------------------------------------------------------------------------------
    My Perl and System characteristics:

    cygwin_nt-10.0-26200 - 3.7.0
AMD Ryzen 5 4600H with Radeon Graphics (AuthenticAMD 3000MHz) x86_64
Perl (/usr/bin/perl:
This is perl 5, version 40, subversion 3 (v5.40.3) built for x86_64-cygwin-threads-multi

    Thanks, all.
        – Soren
    Apr 15, 2026 at 18:38 UTC

    A just machine to make big decisions
    Programmed by fellows (and gals) with compassion and vision
    We'll be clean when their work is done
    We'll be eternally free yes, and eternally young
    Donald Fagen —> I.G.Y.
    (Slightly modified for inclusiveness)
metacpan fastapi can't find the Config module
3 direct replies — Read more / Contribute 		by Anonymous Monk
on Apr 15, 2026 at 10:39
    I ran into this problem looking up module versions with fastapi on metacpan: 
    % perl -MHTTP::Tiny -MJSON::PP -le 'print decode_json(HTTP::Tiny->new-
+>get("https://fastapi.metacpan.org/v1/module/" . shift)->{content})->
+{version}' Encode     
3.21

perl -MHTTP::Tiny -MJSON::PP -le 'print decode_json(HTTP::Tiny->new->g
+et("https://fastapi.metacpan.org/v1/module/" . shift)->{content})->{v
+ersion}' Config
<NOTHING GETS PRINTED>

    [download]
    Results from direct access: 
    fastapi.metacpan.org/v1/module/Encode 

{ "abstract" : "character encodings in Perl"...

fastapi.metacpan.org/v1/module/Config

{ "code" : 404, "message" : "Not found" }

    [download]
ExtUtils::Installed fails to find Catalyst because it doesn't have a .packlist
3 direct replies — Read more / Contribute 		by Anonymous Monk
on Apr 15, 2026 at 10:27 
    
% perl -MExtUtils::Installed -le 'print for ExtUtils::Installed->new->
+files("Catalyst")'
Catalyst is not installed at -e line 1.

% perl -MModule::Metadata -le 'print Module::Metadata->new_from_module
+("Catalyst")->{filename}'                  
/perl5/perlbrew/perls/perl-5.42.0/lib/site_perl/5.42.0/Catalyst.pm

    [download]
    Compare to module with a .packlist: 
    % perl -MExtUtils::Installed -le 'print ExtUtils::Installed->new->pack
+list("CGI")->packlist_file'     
/perl5/perlbrew/perls/perl-5.42.0/lib/site_perl/5.42.0/darwin-2level/a
+uto/CGI/.packlist

ls -l /perl5/perlbrew/perls/perl-5.42.0/lib/site_perl/5.42.0/darwin-2l
+evel/auto/CGI

-rw-r--r--    1 user  staff   1.3K Jan  2 00:34 .packlist
drwxr-xr-x    3 user  staff    96B Jan 10 05:23 Ajax
drwxr-xr-x    3 user  staff    96B Jan 10 05:24 Application
drwxr-xr-x    3 user  staff    96B Jan 10 05:32 Compress
drwxr-xr-x    3 user  staff    96B Jan 10 05:33 PSGI
drwxr-xr-x    3 user  staff    96B Jan 10 05:33 Prototype
drwxr-xr-x    3 user  staff    96B Dec 17 11:39 Simple
drwxr-xr-x    3 user  staff    96B Dec 17 11:39 Struct
drwxr-xr-x    3 user  staff    96B Dec 17 11:39 Wiki

% ls -l /perl5/perlbrew/perls/perl-5.42.0/lib/site_perl/5.42.0/darwin-
+2level/auto/Catalyst            

drwxr-xr-x    4 user  staff   128B Apr 15 07:00 Action
drwxr-xr-x    4 user  staff   128B Apr 15 07:00 Controller
drwxr-xr-x    3 user  staff    96B Dec 17 11:46 Devel
drwxr-xr-x    4 user  staff   128B Apr 15 07:00 Engine
drwxr-xr-x    3 user  staff    96B Dec 17 11:46 Manual
drwxr-xr-x    5 user  staff   160B Dec 17 11:46 Plugin
drwxr-xr-x    3 user  staff    96B Dec 17 11:45 Runtime

    [download]
 (1-10) of 300 Older entries> 

Add your question
Title:
Your question:
Use:  <p> text here (a paragraph) </p>
and:  <code> code here </code>
to format your post, it's "PerlMonks-approved HTML":

  • Posts are HTML formatted. Put <p> </p> tags around your paragraphs. Put <code> </code> tags around your code and data!
  • Titles consisting of a single word are discouraged, and in most cases are disallowed outright.
  • Read Where should I post X? if you're not absolutely sure you're posting in the right place.
  • Please read these before you post! —
  • Posts may use any of the Perl Monks Approved HTML tags:
    a, abbr, b, big, blockquote, br, caption, center, col, colgroup, dd, del, details, div, dl, dt, em, font, h1, h2, h3, h4, h5, h6, hr, i, ins, li, ol, p, pre, readmore, small, span, spoiler, strike, strong, sub, summary, sup, table, tbody, td, tfoot, th, thead, tr, tt, u, ul, wbr
  • You may need to use entities for some characters, as follows. (Exception: Within code tags, you can put the characters literally.)
            For:     Use:
    & &amp;
    < &lt;
    > &gt;
    [ &#91;
    ] &#93;
  • Link using PerlMonks shortcuts! What shortcuts can I use for linking?
  • See Writeup Formatting Tips and other pages linked from there for more info.